Stainless Steel Flexible Hose

Product Overview
 

Qianli Rubber supplies industrial-grade Stainless Steel Flexible Hose assemblies engineered for demanding fluid, gas, and steam transfer applications. Built with an annular corrugated metal core and high-tensile stainless steel wire outer braid, these hoses absorb mechanical vibration, compensate for thermal expansion, and correct permanent pipe misalignment without transmitting stress to rigid piping networks.

 

Each assembly is precision-welded using automated production lines and rigorously pressure-tested to meet international standards, including the EU Pressure Equipment Directive (PED 2014/68/EU) compliance requirements, ensuring structural integrity for OEM equipment builders and plant operators.

 

 
  • Industrial Metal Hose
    Industrial Metal Hose

    Application: petroleum, chemical industry, aerospace, electricity, gas fields.. Material: SS304, SS316, SS321
    Add to Inquiry
  • High Pressure Stainless Steel Flexible Hose
    High Pressure Stainless Steel Flexible Hose

    Inner layer: stainless steel 321. Reinforcement: 1 or 2 stainless steel 304 braided layers. Working pressure: 200-3250psi. Working temperature: -280℃-420℃.
    Add to Inquiry
  • Low Temperature Flexible Hose
    Low Temperature Flexible Hose

    Size: 1/4”-4”. Character: flexible and small bending radius. Advantage: anti-aging, long working life.
    Add to Inquiry
  • High Temperature Flexible Hose
    High Temperature Flexible Hose

    Temperature range: -300℃-800℃. Size:1/4” up to 24”. Application: automotive, steam/water, power generation application.
    Add to Inquiry
  • Stainless Steel Corrugated Flexible Hose(corrugated Metal Hose)
    Stainless Steel Corrugated Flexible Hose(corrugated Metal...

    Character: flexibility and pressure resistance. Material: SS304, SS316, SS321. Length: can be customized. Size: 1”-32”.
    Add to Inquiry
  • 316 Stainless Steel Flexible Hose
    316 Stainless Steel Flexible Hose

    Construction: 316 stainless steel inner layer with 316 wire braid reinforcement. Temperature: -200 ℃+800℃. Character: high temperature resistance, low temperature resistance, corrosion resistance..
    Add to Inquiry
  • 304stainless Steel Flexible Hose
    304stainless Steel Flexible Hose

    304 stainless steel flexible hose is completed made of 304 stainless steel raw material, including inner core layer and outer braided layer and joint.
    Add to Inquiry
 
Key Features & Benefits

High-Tensile Braid Protection: Outer braiding of AISI 304 or 316 stainless steel wire restricts elongation under internal pressure and absorbs external mechanical wear.

 

Annular Corrugated Core: Mechanically formed parallel corrugations provide high flexibility and consistent fatigue life during continuous cyclic motion or vibration.

 

Automated Leak-Free TIG Welding: Longitudinal seam welds and end-fitting connections utilize advanced automated Tungsten Inert Gas (TIG) welding machinery to eliminate micro-fissures and maintain structural integrity under thermal shock.

 

Corrosion Resistance: Wetted components manufactured from austenitic stainless steel grades resist aggressive chemicals, saline environments, and elevated operating temperatures.

 

Configurable End Terminations: Available with fixed or floating carbon steel/stainless steel flanges, male/female NPT or BSP threads, sanitary tri-clamps, and camlock fittings.

 

Technical Specifications

 

Technical Parameter

Standard Specification Range

Size Range (DN)

DN6 (1/4") to DN300 (12")

Hose Core Material

AISI 304, AISI 316L (Standard); AISI 321 (Upon request)

Braid Material

AISI 304 / AISI 316 Stainless Steel Wire

End Fitting Material

Carbon Steel (Zinc-plated), Stainless Steel (304/316), Brass

Connection Types

Flange (ANSI, DIN, JIS), Threaded (NPT, BSP), Camlock, Sanitary Clamp

Operating Temperature

-200°C to +600°C (Depending on material and fitting type)

Working Pressure

Vacuum up to 10.0 MPa (Size and braid layer dependent)

Manufacturing Standards

ISO 10380, GB/T 14525, PED 2014/68/EU Compliant

 

 
 
Applications
01.

HVAC Systems

Chilled water lines, boiler connections, and chiller unit vibration isolation.

02.

Chemical & Petrochemical Plants

Corrosive fluid transfer, acid lines, and solvent handling where media compatibility is critical.

03.

Power Generation & Steam Lines

High-temperature steam headers, turbine exhaust connections, and condensate return lines.

04.

OEM Machinery

Hydraulic power units, compressor discharge lines, and plastic injection molding machine cooling circuits.

 

Product Selection Guide

 

To specify the correct stainless steel flexible hose assembly for an application, evaluate the following operational parameters:

 

Media: Verify chemical compatibility with the inner tube and end fitting materials (e.g., select AISI 316L for chloride environments).

 

Pressure: Determine maximum working pressure and account for potential pressure spikes or water hammer. Select single-braid or double-braid constructions accordingly.

 

Temperature: Factor in media temperature and ambient temperature. High operating temperatures reduce allowable working pressure ratings.

 

Movement & Vibration: Calculate minimum bend radius for static offsets versus dynamic cyclic movement to prevent premature fatigue failure.

 

Length Calculation: Total assembly length must include active hose length plus end-fitting dimensions. Ensure adequate slack to prevent torsional stress during installation.

Low Temperature Flexible Hose

 

Product Selection Guide

 

To specify the correct stainless steel flexible hose assembly for an application, evaluate the following operational parameters:

 

Media: Verify chemical compatibility with the inner tube and end fitting materials (e.g., select AISI 316L for chloride environments).

 

Pressure: Determine maximum working pressure and account for potential pressure spikes or water hammer. Select single-braid or double-braid constructions accordingly.

 

Temperature: Factor in media temperature and ambient temperature. High operating temperatures reduce allowable working pressure ratings.

 

Movement & Vibration: Calculate minimum bend radius for static offsets versus dynamic cyclic movement to prevent premature fatigue failure.

 

Length Calculation: Total assembly length must include active hose length plus end-fitting dimensions. Ensure adequate slack to prevent torsional stress during installation.

High Temperature Flexible Hose

 

Quality Control & Testing
 

Raw Material Verification

In-house direct spectral analysis confirms the precise chemical composition of stainless steel strip and wire coils prior to production.

Pressure Testing

100% of manufactured hose assemblies undergo hydrostatic pressure testing at 1.5 times the maximum allowable working pressure (MAWP) prior to dispatch.

Pneumatic Leak Testing

Air-under-water bubble testing performed on low-pressure or gas-service assemblies.

Weld Inspection

Visual and dimensional inspection of automated TIG weld seams; dye penetrant testing (PT) available upon contract request.

 

 

Frequently Asked Questions

 

Q: What is the difference between single-braided and double-braided stainless steel hoses?

A: A single-braided hose provides standard pressure containment for general industrial use. A double-braided hose incorporates a secondary outer wire mesh layer, which increases the assembly's pressure rating and provides added resistance to external abrasion and high-velocity flow turbulence.

Q: Can these hoses handle torsional (twisting) stress during installation?

A: No. Torsion is the primary cause of premature failure in metal flexible hoses. Hose assemblies must be installed in a single plane of movement. Swivel flanges or threaded unions should be utilized on one end to prevent twisting the hose body during tightening.

Q: What is the minimum bend radius specification for dynamic applications?

A: The minimum bend radius depends on the hose diameter, corrugation profile, and whether the movement is static (fixed offset) or dynamic (frequent flexing). Refer to ISO 10380 calculation guidelines or consult our engineering team with your specific displacement cycle data.

Q: What information is required to request a custom OEM hose assembly?

A: To provide an accurate technical proposal, please supply: inner diameter (DN), overall length, operating pressure, operating temperature, conveyed media, and required end-fitting types (with drawing or standard specification code).

Q: What is the standard lead time for sample and bulk production orders?

A: Standard stock assemblies ship within 3 to 5 business days. Custom engineered configurations and OEM batch production runs typically require 15 to 25 business days depending on raw material availability and testing requirements.

 

modular-1
Request a Quote (RFQ)

Submit your technical specifications or drawings to receive a formal quotation, technical data sheets, and lead time assessment from our engineering team.
Required RFQ Details: Nominal Size | Operating Pressure | Temperature | Quantity | End Fitting Types

As one of the most professional stainless steel flexible hose manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy bulk durable stainless steel flexible hose made in China here from our factory.

304stainless Steel Flexible Hose, High Pressure Stainless Steel Flexible Hose, Industrial Metal Hose

(0/10)

clearall