
Construction:
Tube: An Inner tube of polytetrafluoroethylene (PTFE).
Reinforcement: Reinforced with stainless steel wire SS304 or SS316L.
Temperature: -54 °C to +204°C (-65℉ to +400 ℉)

Introduction:
SAE 100R14 PTFE hydraulic hose for use with petroleum base and synthetic base hydraulic fluids within a temperature range of -54 °C to +204 °C, and with water base hydraulic fluids within the temperature ranges agreed upon by the manufactures of both the hose and the fluid. Type A is consist of an inner tube of polytetrafluoroethylene(PTFE), reinforced with a single braid of 303XX series stainless steel wire. Stainless steel wire braid will not be affected harsh environments including damp environment, oils, chemicals, abrasions and all weathers.
SAE 100R14 PTFE medium pressure hydraulic hose is widely used in air compressor discharge, hot oil and fluids, hot and greasy environments.
SAE 100R14 PTFE | ||||||||||||
Type | Size | I.D | O.D | Max W.P | P.P | Min B.P | Min B.R | |||||
| mm | min | max | min | max | Mpa | Psi | Mpa | Psi | Mpa | Psi | mm | |
| R14-03 | 3.2 | 2.8 | 3.8 | 5.3 | 6.8 | 10.5 | 1523 | 41.4 | 6003 | 82.7 | 11992 | 40 |
| R14-04 | 5 | 4.4 | 5.2 | 7.1 | 8.2 | 10.5 | 1523 | 34.5 | 5003 | 68.9 | 9990 | 50 |
| R14-05 | 6.3 | 6.0 | 6.9 | 8.9 | 10.1 | 10.5 | 1523 | 31.0 | 4495 | 62.0 | 8990 | 75 |
| R14-06 | 8 | 7.5 | 8.4 | 10.4 | 11.6 | 10.5 | 1523 | 27.6 | 4002 | 55.2 | 8004 | 100 |
| R14-07 | 10 | 9.1 | 10.0 | 12.2 | 13.4 | 10.5 | 1523 | 24.1 | 3495 | 48.3 | 7004 | 125 |
| R14-08 | 11 | 9.9 | 10.9 | 12.9 | 14.3 | 7 | 1015 | 20.7 | 3002 | 41.4 | 6003 | 135 |
| R14-10 | 12.5 | 12.3 | 13.3 | 15.3 | 16.8 | 5.6 | 812 | 20.7 | 3002 | 41.4 | 6003 | 165 |
| R14-12 | 16 | 15.3 | 16.5 | 18.6 | 20.1 | 5.6 | 812 | 17.2 | 2494 | 34.5 | 5003 | 200 |
| R14-14 | 19 | 18.4 | 19.6 | 21.3 | 23.3 | 5.6 | 812 | 16.8 | 2436 | 27.6 | 4002 | 230 |
| R14-16 | 22 | 21.4 | 23.0 | 24.6 | 26.9 | 5.6 | 812 | 12.1 | 1755 | 24.1 | 3495 | 230 |
| R14-18 | 25 | 24.6 | 26.2 | 27.8 | 29.8 | 5.6 | 812 | 12.1 | 1755 | 24.1 | 3495 | 300 |
| R14-20 | 29 | 27.8 | 29.4 | 31.9 | 31.9 | 4.2 | 609 | 8.6 | 1247 | 17.2 | 2494 | 410 |

Hot Tags: sae 100r14 ptfe lined hydraulic hose, China sae 100r14 ptfe lined hydraulic hose manufacturers, suppliers, factory, Heavy Duty High Four Spiral Steel Wire Hydraulic Hose, Heavy Duty Impulse Spiral Steel Wire Hydraulic Hose, PTFE Lined Hydraulic Hose, SAE 100 R12 Heavy Duty High Four Spiral Steel Wire Hydraulic Hose, SAE 100R6 Fiber Reinforced Nonmetallic Hydraulic Hose, SAE 100R9 High Pressure Four Spiral Steel Wire Hydraulic Hose

















